6mpa Micro Hydraulic Oil Pump for 1/14 Remote Control Engineering Vehicle Diy

VAJJEXRC

  • $75.00


Micro hydraulic oil pump, strong power, exerting the ultimate hydraulic power of 1/14 RC engineering vehicle.
Brand:VAJJEXRC
We are VAJJEXRC professional 1/14 TAMIYA Tractor Truck accessories provider, you can find all 1/14 RC Truck Trailer Upgraded accessories in my shop.
Name: Brushless oil pump

Model: YB01A, YB02B, YB03C

Voltage requirement: 2S~3S (1S=3.7V)

ESC requirements: 30A and above

This oil pump product can only use hydraulic oil. It is recommended that the hydraulic oil label is No. 46 (46#) hydraulic oil. Do not use other liquids. Otherwise, you will be responsible for the consequences if there is a problem.

-------------------------------------------------- ----------

YB01A

Measured with a 7.4V 2S battery (pressure is about 7mpa), the flow rate is about 0.7L

Tested with 11.1V 3S/12V battery (pressure is about 8 mpa) flow rate is about 0.8L

-------------------------------------------------- ----------

YB02B

Measured with a 7.4V 2S battery (pressure is about 7mpa), the flow rate is about 0.7L

Tested with 11.1V 3S/12V battery (pressure is about 8 mpa) flow rate is about 0.8L

-------------------------------------------------- ----------

YB03C

Use 7.4V 2S battery to test the motor (pressure 0~5MPA)

Use 11.1V 3S/12V battery to test the motor (pressure 0~6MPA)

-------------------------------------------------- ----------

The test conditions are: 12V voltage, 30A Hobbywing Coolpark ESC test, and the oil pump uses 6 outer tubes and 4 inner tubes. The test flow rate of the 10 cm length of the oil inlet pipe exceeds 0.8L per minute. Test parameters are for reference only. The actual situation shall prevail!

Brushless motors must use brushless ESCs to start

 

 


We Also Recommend