STASRC 500ESP Shaft Drive FBL Without Ailerons 500scale Rc Helicopter
Brand: STASRC
Model Aircraft Series: Helicopter
Color classification: 500FBL shaft pass aircraft with pulp, 500FBL leather pass aircraft with pulp, 500FBL shaft pass advanced set, 500FBL leather pass advanced set
500ESP FBL flybarless helicopter/500 scale realistic helicopter fuselage
Universally applicable to ALIGN 500SEP fuselage and accessories, suitable for most 500 scale realistic fuselages
Pure carbon fiber side panels (1.5mm thick), the latest version adopts a new design as follows
1. The tail front counter-rotating gear is upgraded to flat gear 36T (module 0.6), the main rotor and tail rotor speed ratio is 1:4.03
Partial torque has been increased. Use 78mm-80mm tail rotor according to the situation.
2. The fixed height of the battery panel has been reduced by about 25mm, which increases the space for installing the realistic fuselage.
3. The position of the equipment board has been modified, and the fixing board can be installed at the tail of the fuselage and the upper part of the fixing seat.
When installing the realistic aircraft, pay attention to several details.
1. The carbon fiber side panel structure of the fuselage provided by the kit is suitable for use with straight tail aircraft like real aircraft cases,
such as (EC134, MD500, MD530, Bell 222 Airwolf) and other straight tail models
2. If you plan to cooperate, the original carbon fiber side panels of AH-1 Cobra and UH-60 Black Hawk models
and 36T tail front counter-rotating gears are not used. Black Hawk and Cobra need to use these two models of Yuebang
Special 31T tail front counter-rotating gears and special lower tail pipe tail pipe fixing seat side panels that come with real cases
The empty version includes
1: Carbon fiber fuselage assembly + tripod + 430MM glass fiber main rotor + plastic tail
2: Main gear plate assembly (main gear plate 162T) + 13T motor gear
3: Single push metal wake box assembly + carbon fiber vertical tail, horizontal tail
4: Tail support branch rod + tail steering gear steel wire + metal flat tail fixing seat
5: aluminum alloy tail pipe + aluminum alloy transmission shaft group
6:500 black FBL rotor head assembly
7: Slurry support servo fixing piece screw parts package
Note: (This special price does not include headgear and electronic products)
Brand: STASRC
Model Aircraft Series: Helicopter
Color classification: 500FBL shaft pass aircraft with pulp, 500FBL leather pass aircraft with pulp, 500FBL shaft pass advanced set, 500FBL leather pass advanced set
500ESP FBL flybarless helicopter/500 scale realistic helicopter fuselage
Universally applicable to ALIGN 500SEP fuselage and accessories, suitable for most 500 scale realistic fuselages
Pure carbon fiber side panels (1.5mm thick), the latest version adopts a new design as follows
1. The tail front counter-rotating gear is upgraded to flat gear 36T (module 0.6), the main rotor and tail rotor speed ratio is 1:4.03
Partial torque has been increased. Use 78mm-80mm tail rotor according to the situation.
2. The fixed height of the battery panel has been reduced by about 25mm, which increases the space for installing the realistic fuselage.
3. The position of the equipment board has been modified, and the fixing board can be installed at the tail of the fuselage and the upper part of the fixing seat.
When installing the realistic aircraft, pay attention to several details.
1. The carbon fiber side panel structure of the fuselage provided by the kit is suitable for use with straight tail aircraft like real aircraft cases,
such as (EC134, MD500, MD530, Bell 222 Airwolf) and other straight tail models
2. If you plan to cooperate, the original carbon fiber side panels of AH-1 Cobra and UH-60 Black Hawk models
and 36T tail front counter-rotating gears are not used. Black Hawk and Cobra need to use these two models of Yuebang
Special 31T tail front counter-rotating gears and special lower tail pipe tail pipe fixing seat side panels that come with real cases
The empty version includes
1: Carbon fiber fuselage assembly + tripod + 430MM glass fiber main rotor + plastic tail
2: Main gear plate assembly (main gear plate 162T) + 13T motor gear
3: Single push metal wake box assembly + carbon fiber vertical tail, horizontal tail
4: Tail support branch rod + tail steering gear steel wire + metal flat tail fixing seat
5: aluminum alloy tail pipe + aluminum alloy transmission shaft group
6:500 black FBL rotor head assembly
7: Slurry support servo fixing piece screw parts package
Note: (This special price does not include headgear and electronic products)
Brand: STASRC
Model Aircraft Series: Helicopter
Color classification: 500FBL shaft pass aircraft with pulp, 500FBL leather pass aircraft with pulp, 500FBL shaft pass advanced set, 500FBL leather pass advanced set
500ESP FBL flybarless helicopter/500 scale realistic helicopter fuselage
Universally applicable to ALIGN 500SEP fuselage and accessories, suitable for most 500 scale realistic fuselages
Pure carbon fiber side panels (1.5mm thick), the latest version adopts a new design as follows
1. The tail front counter-rotating gear is upgraded to flat gear 36T (module 0.6), the main rotor and tail rotor speed ratio is 1:4.03
Partial torque has been increased. Use 78mm-80mm tail rotor according to the situation.
2. The fixed height of the battery panel has been reduced by about 25mm, which increases the space for installing the realistic fuselage.
3. The position of the equipment board has been modified, and the fixing board can be installed at the tail of the fuselage and the upper part of the fixing seat.
When installing the realistic aircraft, pay attention to several details.
1. The carbon fiber side panel structure of the fuselage provided by the kit is suitable for use with straight tail aircraft like real aircraft cases,
such as (EC134, MD500, MD530, Bell 222 Airwolf) and other straight tail models
2. If you plan to cooperate, the original carbon fiber side panels of AH-1 Cobra and UH-60 Black Hawk models
and 36T tail front counter-rotating gears are not used. Black Hawk and Cobra need to use these two models of Yuebang
Special 31T tail front counter-rotating gears and special lower tail pipe tail pipe fixing seat side panels that come with real cases
The empty version includes
1: Carbon fiber fuselage assembly + tripod + 430MM glass fiber main rotor + plastic tail
2: Main gear plate assembly (main gear plate 162T) + 13T motor gear
3: Single push metal wake box assembly + carbon fiber vertical tail, horizontal tail
4: Tail support branch rod + tail steering gear steel wire + metal flat tail fixing seat
5: aluminum alloy tail pipe + aluminum alloy transmission shaft group
6:500 black FBL rotor head assembly
7: Slurry support servo fixing piece screw parts package
Note: (This special price does not include headgear and electronic products)
Brand: STASRC
Model Aircraft Series: Helicopter
Color classification: 500FBL shaft pass aircraft with pulp, 500FBL leather pass aircraft with pulp, 500FBL shaft pass advanced set, 500FBL leather pass advanced set
500ESP FBL flybarless helicopter/500 scale realistic helicopter fuselage
Universally applicable to ALIGN 500SEP fuselage and accessories, suitable for most 500 scale realistic fuselages
Pure carbon fiber side panels (1.5mm thick), the latest version adopts a new design as follows
1. The tail front counter-rotating gear is upgraded to flat gear 36T (module 0.6), the main rotor and tail rotor speed ratio is 1:4.03
Partial torque has been increased. Use 78mm-80mm tail rotor according to the situation.
2. The fixed height of the battery panel has been reduced by about 25mm, which increases the space for installing the realistic fuselage.
3. The position of the equipment board has been modified, and the fixing board can be installed at the tail of the fuselage and the upper part of the fixing seat.
When installing the realistic aircraft, pay attention to several details.
1. The carbon fiber side panel structure of the fuselage provided by the kit is suitable for use with straight tail aircraft like real aircraft cases,
such as (EC134, MD500, MD530, Bell 222 Airwolf) and other straight tail models
2. If you plan to cooperate, the original carbon fiber side panels of AH-1 Cobra and UH-60 Black Hawk models
and 36T tail front counter-rotating gears are not used. Black Hawk and Cobra need to use these two models of Yuebang
Special 31T tail front counter-rotating gears and special lower tail pipe tail pipe fixing seat side panels that come with real cases
The empty version includes
1: Carbon fiber fuselage assembly + tripod + 430MM glass fiber main rotor + plastic tail
2: Main gear plate assembly (main gear plate 162T) + 13T motor gear
3: Single push metal wake box assembly + carbon fiber vertical tail, horizontal tail
4: Tail support branch rod + tail steering gear steel wire + metal flat tail fixing seat
5: aluminum alloy tail pipe + aluminum alloy transmission shaft group
6:500 black FBL rotor head assembly
7: Slurry support servo fixing piece screw parts package
Note: (This special price does not include headgear and electronic products)
Brand: STASRC
Model Aircraft Series: Helicopter
Color classification: 500FBL shaft pass aircraft with pulp, 500FBL leather pass aircraft with pulp, 500FBL shaft pass advanced set, 500FBL leather pass advanced set
500ESP FBL flybarless helicopter/500 scale realistic helicopter fuselage
Universally applicable to ALIGN 500SEP fuselage and accessories, suitable for most 500 scale realistic fuselages
Pure carbon fiber side panels (1.5mm thick), the latest version adopts a new design as follows
1. The tail front counter-rotating gear is upgraded to flat gear 36T (module 0.6), the main rotor and tail rotor speed ratio is 1:4.03
Partial torque has been increased. Use 78mm-80mm tail rotor according to the situation.
2. The fixed height of the battery panel has been reduced by about 25mm, which increases the space for installing the realistic fuselage.
3. The position of the equipment board has been modified, and the fixing board can be installed at the tail of the fuselage and the upper part of the fixing seat.
When installing the realistic aircraft, pay attention to several details.
1. The carbon fiber side panel structure of the fuselage provided by the kit is suitable for use with straight tail aircraft like real aircraft cases,
such as (EC134, MD500, MD530, Bell 222 Airwolf) and other straight tail models
2. If you plan to cooperate, the original carbon fiber side panels of AH-1 Cobra and UH-60 Black Hawk models
and 36T tail front counter-rotating gears are not used. Black Hawk and Cobra need to use these two models of Yuebang
Special 31T tail front counter-rotating gears and special lower tail pipe tail pipe fixing seat side panels that come with real cases
The empty version includes
1: Carbon fiber fuselage assembly + tripod + 430MM glass fiber main rotor + plastic tail
2: Main gear plate assembly (main gear plate 162T) + 13T motor gear
3: Single push metal wake box assembly + carbon fiber vertical tail, horizontal tail
4: Tail support branch rod + tail steering gear steel wire + metal flat tail fixing seat
5: aluminum alloy tail pipe + aluminum alloy transmission shaft group
6:500 black FBL rotor head assembly
7: Slurry support servo fixing piece screw parts package
Note: (This special price does not include headgear and electronic products)
Brand: STASRC
Model Aircraft Series: Helicopter
Color classification: 500FBL shaft pass aircraft with pulp, 500FBL leather pass aircraft with pulp, 500FBL shaft pass advanced set, 500FBL leather pass advanced set
500ESP FBL flybarless helicopter/500 scale realistic helicopter fuselage
Universally applicable to ALIGN 500SEP fuselage and accessories, suitable for most 500 scale realistic fuselages
Pure carbon fiber side panels (1.5mm thick), the latest version adopts a new design as follows
1. The tail front counter-rotating gear is upgraded to flat gear 36T (module 0.6), the main rotor and tail rotor speed ratio is 1:4.03
Partial torque has been increased. Use 78mm-80mm tail rotor according to the situation.
2. The fixed height of the battery panel has been reduced by about 25mm, which increases the space for installing the realistic fuselage.
3. The position of the equipment board has been modified, and the fixing board can be installed at the tail of the fuselage and the upper part of the fixing seat.
When installing the realistic aircraft, pay attention to several details.
1. The carbon fiber side panel structure of the fuselage provided by the kit is suitable for use with straight tail aircraft like real aircraft cases,
such as (EC134, MD500, MD530, Bell 222 Airwolf) and other straight tail models
2. If you plan to cooperate, the original carbon fiber side panels of AH-1 Cobra and UH-60 Black Hawk models
and 36T tail front counter-rotating gears are not used. Black Hawk and Cobra need to use these two models of Yuebang
Special 31T tail front counter-rotating gears and special lower tail pipe tail pipe fixing seat side panels that come with real cases
The empty version includes
1: Carbon fiber fuselage assembly + tripod + 430MM glass fiber main rotor + plastic tail
2: Main gear plate assembly (main gear plate 162T) + 13T motor gear
3: Single push metal wake box assembly + carbon fiber vertical tail, horizontal tail
4: Tail support branch rod + tail steering gear steel wire + metal flat tail fixing seat
5: aluminum alloy tail pipe + aluminum alloy transmission shaft group
6:500 black FBL rotor head assembly
7: Slurry support servo fixing piece screw parts package
Note: (This special price does not include headgear and electronic products)
Brand: STASRC
Model Aircraft Series: Helicopter
Color classification: 500FBL shaft pass aircraft with pulp, 500FBL leather pass aircraft with pulp, 500FBL shaft pass advanced set, 500FBL leather pass advanced set
500ESP FBL flybarless helicopter/500 scale realistic helicopter fuselage
Universally applicable to ALIGN 500SEP fuselage and accessories, suitable for most 500 scale realistic fuselages
Pure carbon fiber side panels (1.5mm thick), the latest version adopts a new design as follows
1. The tail front counter-rotating gear is upgraded to flat gear 36T (module 0.6), the main rotor and tail rotor speed ratio is 1:4.03
Partial torque has been increased. Use 78mm-80mm tail rotor according to the situation.
2. The fixed height of the battery panel has been reduced by about 25mm, which increases the space for installing the realistic fuselage.
3. The position of the equipment board has been modified, and the fixing board can be installed at the tail of the fuselage and the upper part of the fixing seat.
When installing the realistic aircraft, pay attention to several details.
1. The carbon fiber side panel structure of the fuselage provided by the kit is suitable for use with straight tail aircraft like real aircraft cases,
such as (EC134, MD500, MD530, Bell 222 Airwolf) and other straight tail models
2. If you plan to cooperate, the original carbon fiber side panels of AH-1 Cobra and UH-60 Black Hawk models
and 36T tail front counter-rotating gears are not used. Black Hawk and Cobra need to use these two models of Yuebang
Special 31T tail front counter-rotating gears and special lower tail pipe tail pipe fixing seat side panels that come with real cases
The empty version includes
1: Carbon fiber fuselage assembly + tripod + 430MM glass fiber main rotor + plastic tail
2: Main gear plate assembly (main gear plate 162T) + 13T motor gear
3: Single push metal wake box assembly + carbon fiber vertical tail, horizontal tail
4: Tail support branch rod + tail steering gear steel wire + metal flat tail fixing seat
5: aluminum alloy tail pipe + aluminum alloy transmission shaft group
6:500 black FBL rotor head assembly
7: Slurry support servo fixing piece screw parts package
Note: (This special price does not include headgear and electronic products)
Brand: STASRC
Model Aircraft Series: Helicopter
Color classification: 500FBL shaft pass aircraft with pulp, 500FBL leather pass aircraft with pulp, 500FBL shaft pass advanced set, 500FBL leather pass advanced set
500ESP FBL flybarless helicopter/500 scale realistic helicopter fuselage
Universally applicable to ALIGN 500SEP fuselage and accessories, suitable for most 500 scale realistic fuselages
Pure carbon fiber side panels (1.5mm thick), the latest version adopts a new design as follows
1. The tail front counter-rotating gear is upgraded to flat gear 36T (module 0.6), the main rotor and tail rotor speed ratio is 1:4.03
Partial torque has been increased. Use 78mm-80mm tail rotor according to the situation.
2. The fixed height of the battery panel has been reduced by about 25mm, which increases the space for installing the realistic fuselage.
3. The position of the equipment board has been modified, and the fixing board can be installed at the tail of the fuselage and the upper part of the fixing seat.
When installing the realistic aircraft, pay attention to several details.
1. The carbon fiber side panel structure of the fuselage provided by the kit is suitable for use with straight tail aircraft like real aircraft cases,
such as (EC134, MD500, MD530, Bell 222 Airwolf) and other straight tail models
2. If you plan to cooperate, the original carbon fiber side panels of AH-1 Cobra and UH-60 Black Hawk models
and 36T tail front counter-rotating gears are not used. Black Hawk and Cobra need to use these two models of Yuebang
Special 31T tail front counter-rotating gears and special lower tail pipe tail pipe fixing seat side panels that come with real cases
The empty version includes
1: Carbon fiber fuselage assembly + tripod + 430MM glass fiber main rotor + plastic tail
2: Main gear plate assembly (main gear plate 162T) + 13T motor gear
3: Single push metal wake box assembly + carbon fiber vertical tail, horizontal tail
4: Tail support branch rod + tail steering gear steel wire + metal flat tail fixing seat
5: aluminum alloy tail pipe + aluminum alloy transmission shaft group
6:500 black FBL rotor head assembly
7: Slurry support servo fixing piece screw parts package
Note: (This special price does not include headgear and electronic products)
We Also Recommend
SN AAT PLUS FPV Automatic Tracking Antenna Gimbal Digital Transmission
