Xinyue Steam FlyDragon Gyroscope Rotorflight Flight Control Built-in Receiver for Rc Helicopter

Xinyue

  • $103.40
Sendado kalkulita ĉe la kaso.


Disclaimer:

Rotorflight is free software and does not guarantee or imply any quality or reliability of the firmware. It is supported by the user as a community. Rotorflight is under the GPLV3 license. If operated improperly, the RC model may cause serious injury or even death. If you decide to use Rotorlight firmware, you will be fully responsible for your model. Any injury or damage caused by the use of Rotorflight firmware shall not be the responsibility of the author, RF gyroscope designer, or distributor of Rotorflight. Please use with caution.

 

Product Description:

1,Introduction to FlyDragon Gyroscope: The FlyDragon gyroscope uses open-source Rotorflight firmware, which is based on Betaflight 4.3 and enjoys all the powerful features of the Betaflight platform, as well as many new features added to helicopters. Rotorflight also draws on the ideas and code of Heliflight3D.

 

"Rotorflight Light Open Source Address" Link:https://github.com/rotorflight

 

2, Flight mode: Self stable mode, semi self stable mode, 3D mode, rescue mode

 

3,Hardware configuration:

Main control: STM32F722RET6

Gyroscope: BM1270

Black box: W25N01G (128MB)

Barometer: SPL06

Color light: WS2812

Buzzer: 5V active buzzer

USB: Type-C

Serial ports: UART2, UART3, UART5

120:12C1

ADC: ADC1 (12S)

Servo channel: CH1-CH4

Speed input: RPM_ E (Electric Speed Line), RPM_ S (speed sensor)

Built in receiver: ELRS dual antenna receiver 2.4G (serial port 1)

External receiver: CRSF, S BUS, F PORT, GHOST, SUMD, SUMH, IBUS, XBUS, XBUS/RJ01, EXBUS, PPM, MSP, DSM (self equipped BEC 3.3V power module)

BEC voltage: 5-15V

5V power output: 5V-1.5A

Electric dispatch protocol: PWM, ONESHOT125, ONESHOT42, Multishot, BRUSHED, DSHOT150, DSHOT300, DSHOT600.PROSHOT

Supports electrical call back: BLHeli32, Hobbywing V4, Hobbywing V5, Scorpion, Kontronik, 0MPHobby, ZTW APD

Size: 45mmx27mmx14.5mm

Weight: 27g

Disclaimer:

Rotorflight is free software and does not guarantee or imply any quality or reliability of the firmware. It is supported by the user as a community. Rotorflight is under the GPLV3 license. If operated improperly, the RC model may cause serious injury or even death. If you decide to use Rotorlight firmware, you will be fully responsible for your model. Any injury or damage caused by the use of Rotorflight firmware shall not be the responsibility of the author, RF gyroscope designer, or distributor of Rotorflight. Please use with caution.

 

Product Description:

1,Introduction to FlyDragon Gyroscope: The FlyDragon gyroscope uses open-source Rotorflight firmware, which is based on Betaflight 4.3 and enjoys all the powerful features of the Betaflight platform, as well as many new features added to helicopters. Rotorflight also draws on the ideas and code of Heliflight3D.

 

"Rotorflight Light Open Source Address" Link:https://github.com/rotorflight

 

2, Flight mode: Self stable mode, semi self stable mode, 3D mode, rescue mode

 

3,Hardware configuration:

Main control: STM32F722RET6

Gyroscope: BM1270

Black box: W25N01G (128MB)

Barometer: SPL06

Color light: WS2812

Buzzer: 5V active buzzer

USB: Type-C

Serial ports: UART2, UART3, UART5

120:12C1

ADC: ADC1 (12S)

Servo channel: CH1-CH4

Speed input: RPM_ E (Electric Speed Line), RPM_ S (speed sensor)

Built in receiver: ELRS dual antenna receiver 2.4G (serial port 1)

External receiver: CRSF, S BUS, F PORT, GHOST, SUMD, SUMH, IBUS, XBUS, XBUS/RJ01, EXBUS, PPM, MSP, DSM (self equipped BEC 3.3V power module)

BEC voltage: 5-15V

5V power output: 5V-1.5A

Electric dispatch protocol: PWM, ONESHOT125, ONESHOT42, Multishot, BRUSHED, DSHOT150, DSHOT300, DSHOT600.PROSHOT

Supports electrical call back: BLHeli32, Hobbywing V4, Hobbywing V5, Scorpion, Kontronik, 0MPHobby, ZTW APD

Size: 45mmx27mmx14.5mm

Weight: 27g

 


Ni Ankaŭ Rekomendas