1/24 MINI-D Brushless with Gyroscope RWD Rc Drift Car RTR
1/24 MINI-D Brushless with Gyroscope RWD Rc Drift Car RTR
Full brush package configuration
1 Metal car body
2 Brushless ESC + Brushless motor
3 520mAh battery X1
4 9g digital servo
5 Charger
6. X6FG gyro six-channel remote control
7. Large size metal wheels + tires
1. The wheelbase of the car body is 110mm, and the frame can be adjusted from 106mm to 120mm.
2. Four types of servo fixed distance adjustment;
JS: According to the change of the wheelbase length of the frame, adjust the appropriate angle of the servo pull rod;
3. Motor seat adjustment;
JS: Gear meshing can be fine-tuned, and different T number gears can be replaced;
4. The front and rear upper rocker arms can fine-tune the front and rear chamfers and inclinations of the inner and outer corners of the wheels (low low).
JS: Adjust different data to adapt to the requirements of different venues and competitions;
5. Adjustable Kimi screws for front and rear A-arms (lower rocker arms)
JS: The balance and height of the left and right sides of the vehicle body can be adjusted;
6. The whole vehicle is designed with 18 metal ball bearings
JS: Generally, mini cars have 14 bearings.
7. Unique adjustable ball differential
JS: Each ball differential has 4 metal ball bearings inside and outside, which can not only adjust the tightness, but also be directly adjusted to a straight axis for drifting.
PS: The adjustable ball differential is used for high-end flat-land racing model cars. The ball differential operates smoothly and softly, and accelerates quickly through corners. It can effectively alleviate the shaft effect of the side-mounted motor, making it easier to play the straight-line advantage. In some major foreign brands, such as Yokomo, the ordinary version of its series is equipped with a gear differential, and only its top-end version is equipped with an adjustable ball differential;
The design has the same forward tilt angle design as the 1:10 mainstream drift frame, not only that, but it can also be adjusted to a positive angle racing mode. The 1:10 frame currently does not have this positive angle adjustment function, so it is necessary to distinguish between 1:10 drift and racing frames, and MINI-D can set both drift and racing modes.
The role of the lead angle design: to help the body be more stable when driving horizontally and travel farther. For example, when the steering is turned to the maximum left, the landing area of the left and right wheels will be relatively reduced, thereby reducing excessive friction, and the posture is also very beautiful!
RC remote control drifting is a sport that requires high technical requirements. It is also a good exercise equipment for teenagers in the process of growth, but the technology cannot be practiced in a short time, it requires patience and practice.
