MST RMX-M S PRO KIT 1/10 Professional Rear Drive Drift Frame for Tamiya M Body 532207
Note: The car shell is transparent, the picture is just displayed, you need to apply it yourself
Specification: 1/10 drifting car
Drive mode: MR/RR
Wheelbase: 225 / 233mm
Width: 164mm (+3 offset)
Caster: 6/8/10/12 degrees (adjustable)
Camber: adjustable 0 to -12 degrees
Pearl bearing
Hydraulic shock absorber
Applicable to the vast majority of TAMIYA M car shell
RMX-M is a rear-wheel drive drift car that meets the real M vehicle specifications. Rannal narrowing design (164mm) and optional wheelbase 210/225/233/239/245 to correspond to the full -size M car shell on the market (the factory is equipped with 225/233mm wheelbase chassis, and other wheelbases will be launched one after another. The chassis is for purchase).
It adopts a professional M vehicle specifications drift chassis and factory settings to provide entry -level players with easy controlling drift experience. At the same time, it provides a professional level of large -level drift capacity and posture. Even with the improvement of driving skills, the original factory will launch more more than more Upgrade accessories are used for purchase, which has greater performance potential.
Experienced players will truly appreciate the joy and unique drift experience of the M -chassis and M car body.
1. Plague upper upper deck.
2. Use the RMX 2.5 post -wave box, which can be assembled into a 4 -toothed MR layout and 3 tooth RR layout
3. First use the new ATK V2 front steering cup design for the first time
4. Big angle steering
5. First of all
6. Newly designed M -car size tires and wheels. The width of the rear wheels is width than the front wheel, which can increase the traction of the rear wheel
7. For the first time, the newly designed gear differential device
8. Two installation methods for electric motor installation-upper gravity or lower gravity deployment
9. Post -steel transmission shaft
10. Standard simulation disc brakes and caliper
11. Rolling Pearl Bearing
12. Oil pressure shock absorberSpecification: 1/10 drifting car
Drive mode: MR/RR
Wheelbase: 225 / 233mm
Width: 164mm (+3 offset)
Caster: 6/8/10/12 degrees (adjustable)
Camber: adjustable 0 to -12 degrees
Pearl bearing
Hydraulic shock absorber
Applicable to the vast majority of TAMIYA M car shell
RMX-M is a rear-wheel drive drift car that meets the real M vehicle specifications. Rannal narrowing design (164mm) and optional wheelbase 210/225/233/239/245 to correspond to the full -size M car shell on the market (the factory is equipped with 225/233mm wheelbase chassis, and other wheelbases will be launched one after another. The chassis is for purchase).
It adopts a professional M vehicle specifications drift chassis and factory settings to provide entry -level players with easy controlling drift experience. At the same time, it provides a professional level of large -level drift capacity and posture. Even with the improvement of driving skills, the original factory will launch more more than more Upgrade accessories are used for purchase, which has greater performance potential.
Experienced players will truly appreciate the joy and unique drift experience of the M -chassis and M car body.
1. Plague upper upper deck.
2. Use the RMX 2.5 post -wave box, which can be assembled into a 4 -toothed MR layout and 3 tooth RR layout
3. First use the new ATK V2 front steering cup design for the first time
4. Big angle steering
5. First of all
6. Newly designed M -car size tires and wheels. The width of the rear wheels is width than the front wheel, which can increase the traction of the rear wheel
7. For the first time, the newly designed gear differential device
8. Two installation methods for electric motor installation-upper gravity or lower gravity deployment
9. Post -steel transmission shaft
10. Standard simulation disc brakes and caliper
11. Rolling Pearl Bearing
12. Oil pressure shock absorber
Specification: 1/10 drifting car
Drive mode: MR/RR
Wheelbase: 225 / 233mm
Width: 164mm (+3 offset)
Caster: 6/8/10/12 degrees (adjustable)
Camber: adjustable 0 to -12 degrees
Pearl bearing
Hydraulic shock absorber
Applicable to the vast majority of TAMIYA M car shell
RMX-M is a rear-wheel drive drift car that meets the real M vehicle specifications. Rannal narrowing design (164mm) and optional wheelbase 210/225/233/239/245 to correspond to the full -size M car shell on the market (the factory is equipped with 225/233mm wheelbase chassis, and other wheelbases will be launched one after another. The chassis is for purchase).
It adopts a professional M vehicle specifications drift chassis and factory settings to provide entry -level players with easy controlling drift experience. At the same time, it provides a professional level of large -level drift capacity and posture. Even with the improvement of driving skills, the original factory will launch more more than more Upgrade accessories are used for purchase, which has greater performance potential.
Experienced players will truly appreciate the joy and unique drift experience of the M -chassis and M car body.
1. Plague upper upper deck.
2. Use the RMX 2.5 post -wave box, which can be assembled into a 4 -toothed MR layout and 3 tooth RR layout
3. First use the new ATK V2 front steering cup design for the first time
4. Big angle steering
5. First of all
6. Newly designed M -car size tires and wheels. The width of the rear wheels is width than the front wheel, which can increase the traction of the rear wheel
7. For the first time, the newly designed gear differential device
8. Two installation methods for electric motor installation-upper gravity or lower gravity deployment
9. Post -steel transmission shaft
10. Standard simulation disc brakes and caliper
11. Rolling Pearl Bearing
12. Oil pressure shock absorberSpecification: 1/10 drifting car
Drive mode: MR/RR
Wheelbase: 225 / 233mm
Width: 164mm (+3 offset)
Caster: 6/8/10/12 degrees (adjustable)
Camber: adjustable 0 to -12 degrees
Pearl bearing
Hydraulic shock absorber
Applicable to the vast majority of TAMIYA M car shell
RMX-M is a rear-wheel drive drift car that meets the real M vehicle specifications. Rannal narrowing design (164mm) and optional wheelbase 210/225/233/239/245 to correspond to the full -size M car shell on the market (the factory is equipped with 225/233mm wheelbase chassis, and other wheelbases will be launched one after another. The chassis is for purchase).
It adopts a professional M vehicle specifications drift chassis and factory settings to provide entry -level players with easy controlling drift experience. At the same time, it provides a professional level of large -level drift capacity and posture. Even with the improvement of driving skills, the original factory will launch more more than more Upgrade accessories are used for purchase, which has greater performance potential.
Experienced players will truly appreciate the joy and unique drift experience of the M -chassis and M car body.
1. Plague upper upper deck.
2. Use the RMX 2.5 post -wave box, which can be assembled into a 4 -toothed MR layout and 3 tooth RR layout
3. First use the new ATK V2 front steering cup design for the first time
4. Big angle steering
5. First of all
6. Newly designed M -car size tires and wheels. The width of the rear wheels is width than the front wheel, which can increase the traction of the rear wheel
7. For the first time, the newly designed gear differential device
8. Two installation methods for electric motor installation-upper gravity or lower gravity deployment
9. Post -steel transmission shaft
10. Standard simulation disc brakes and caliper
11. Rolling Pearl Bearing
12. Oil pressure shock absorber
