1/14 RC Hydraulic Forklift rtr

VAJJEXRC

  • $866.25


Size: length 311.5, width 115.6, height 210, unit MM

 

Weight: 3.64KG, plus remote control 4.2KG

 

Lifting force: 1.5 kg

 

Hardness of tire rubber: 45 degrees

 

Remote control: FS-I6S, with 6-channel receiver

 

Note: The remote control uses 4 AA batteries

 

Main car battery: 7.4V 2S lithium battery (battery connector is XT60) charge 3C and discharge 20C

 

Battery size: length 83MM width 40MM height within 16MM size (battery and power display need to be purchased separately)

 

Steps:

 

1. Before turning on the remote control, please check that the position of each switch is up and the joystick is back to the neutral position, and the switch can be turned on after confirmation.

 

2. Turn on the remote control switch (the remote control switch should be in the up position),

 

3. Connect the main car power supply and wait for the signal sound to confirm before operation (about 5S)

 

Notice:

 

1. If the operation is performed in advance, it is very likely that the ESC will enter the setting mode, resulting in the ESC not working properly.

 

2. Remote control battery installation: Pay attention to the positive and negative poles of the battery during installation.

 

3. Before installing the main car battery: first measure the voltage, the voltage should not be lower than 7.4V.

 

 

Scale: 1:14

 

 


We Also Recommend