Sub250 Whoopfly16 Combo FPV Whoop RTF
Sub250 Whoopfly16 Analog Elrs 2.4G Tiny Whoop 75mm
Specifications:
Product name: Whoopfly16 Analog Elrs 2.4
Frame: WF16
Wheelbase size: 75mm
Flight control system: Redfox A1 F4 5A 4in1 1S AIO FC
MCU: STMF411
IMU: ICM42688-P
OSD: BetaFlight OSD w/AT7456E chip
ESC: Redfox A1 4IN1 5A ESC
VTX: VTX 5.8G 200mW
Lens: Caddx Ant eco
Propeller: Gemfan 1608-3
Antenna: 5.8g copper tube antenna 70mm
ELRS Version weight: 35.2g
Receiver: ELRS 2.4G (SPI)
SUB250 MICRORADIO ELRS 2.4G TRANSMITTER
Specifications
Product name: MicroRadio
Size：147*135*71mm (Not including antenna)
Weight：223g
Adapted Drone Type: Multirotor, Airplane
Frequency band：2.4GHz ISM
Input voltage：6.6-8.4V
Antenna interface： SMA
Power：100/250/500mW
Channel：8 channel
Charging interface： USB-C
Firmware upgrade： Support
Bluetooth joystick： Support
Note: Not including Remote Control's Battery
Sub250 Goggles 01
Specifications
Product name: Goggles 01
Resolution：800*480px
Size of screen: 4.3 inch
Size: 155mm*144mm*113mm
Built-in Batteries: 3.7v / 2000 mAh
Working Time: 2.5 hours
Weight: 314.6g
WHOOPFLY16 RTF KIT'S PACKAGE INCLUDES:
1 x Whoopfly16 Analog Elrs 2.4g FPV Drone
1 x MicroRadio
1 x Sub250 Goggles 01
1 x Sub-CW1 charger
2 x Sub250 530mAh 90C 1S batteries
4 x 1608-3 Propellers
1 x Phillips screwdriver
1 x L-type Allen screwdriver (1.5mm)
1 x Portable Storage Bag
Whoopfly16 RTF Basic Teaching
Whoopfly16 RTF Basic Teaching
Open the bag
Take out the radio/ goggles /drone/ and batteries
Take out two 5.8g antennas and install them on the goggles
Mounting the single antenna on the radio
Long press the radio power button to power the radio first
Long press the goggles power button to power
Plug in the battery to power the drone
The batteries can be recharged via Sub250-CW1 charger
The drone has been bound to the radio's default factory settings
Just place all the levers at the top and the throttle at the bottom
Pull the leftmost lever down, and the drone is unlocked
The drone default to the angle mode. You can connect betaflight configurator install more mode
Short press the menu button of goggles to enter the one-click search mode
The goggles will automatically select best signal channel according to the signal strength
Wearing your goggles to start flying now!
Specifications:
Product name: Whoopfly16 Analog Elrs 2.4
Frame: WF16
Wheelbase size: 75mm
Flight control system: Redfox A1 F4 5A 4in1 1S AIO FC
MCU: STMF411
IMU: ICM42688-P
OSD: BetaFlight OSD w/AT7456E chip
ESC: Redfox A1 4IN1 5A ESC
VTX: VTX 5.8G 200mW
Lens: Caddx Ant eco
Propeller: Gemfan 1608-3
Antenna: 5.8g copper tube antenna 70mm
ELRS Version weight: 35.2g
Receiver: ELRS 2.4G (SPI)
SUB250 MICRORADIO ELRS 2.4G TRANSMITTER
Specifications
Product name: MicroRadio
Size：147*135*71mm (Not including antenna)
Weight：223g
Adapted Drone Type: Multirotor, Airplane
Frequency band：2.4GHz ISM
Input voltage：6.6-8.4V
Antenna interface： SMA
Power：100/250/500mW
Channel：8 channel
Charging interface： USB-C
Firmware upgrade： Support
Bluetooth joystick： Support
Note: Not including Remote Control's Battery
Sub250 Goggles 01
Specifications
Product name: Goggles 01
Resolution：800*480px
Size of screen: 4.3 inch
Size: 155mm*144mm*113mm
Built-in Batteries: 3.7v / 2000 mAh
Working Time: 2.5 hours
Weight: 314.6g
WHOOPFLY16 RTF KIT'S PACKAGE INCLUDES:
1 x Whoopfly16 Analog Elrs 2.4g FPV Drone
1 x MicroRadio
1 x Sub250 Goggles 01
1 x Sub-CW1 charger
2 x Sub250 530mAh 90C 1S batteries
4 x 1608-3 Propellers
1 x Phillips screwdriver
1 x L-type Allen screwdriver (1.5mm)
1 x Portable Storage Bag
Whoopfly16 RTF Basic Teaching
Whoopfly16 RTF Basic Teaching
Open the bag
Take out the radio/ goggles /drone/ and batteries
Take out two 5.8g antennas and install them on the goggles
Mounting the single antenna on the radio
Long press the radio power button to power the radio first
Long press the goggles power button to power
Plug in the battery to power the drone
The batteries can be recharged via Sub250-CW1 charger
The drone has been bound to the radio's default factory settings
Just place all the levers at the top and the throttle at the bottom
Pull the leftmost lever down, and the drone is unlocked
The drone default to the angle mode. You can connect betaflight configurator install more mode
Short press the menu button of goggles to enter the one-click search mode
The goggles will automatically select best signal channel according to the signal strength
Wearing your goggles to start flying now!
